Check BRAKE fluid level. Or is it a "tail lamp" warning? Y-THINK-Y
check the brake light switch behind the brake pedal under the dash.
I don't know the Acura as they are not in the UK But it may well have safety device fitted that will not allow you to shift from park unless your foot is on the brake pedal. If this is the case, check that the brake lights are working, if they are not it may indicate a faulty brake light switch.
Replace bulbs Check the fuse Check the stop light switch
Check to make sure the brake lights are working when the dash lights don't - usually it's a fuse in the brake light circuit.Om both of these, it is a tedious job not ot mess something up while working in the printed circuits etc. I suggest taking it ot a garage.
Acura legend ls ( First Generation)G1At night the rear brake lights won't stay ON ...........My rear brake lights would go out only when I pull the E- Brake down?Caution to Driver's behind you use FlashersDaytime running light relay(0099) is mounted on the rear seat of the car (Canada)
I have an 95 Legend and when I step on the brakes I cant shift from park. Also I have no brake lights in the back as well. I checked all the fuses and they are goood. What to do?
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.
Check the Brake switch that's mounted on the brake pedal bracket, they can get jamed and cause the contacts to pass the 12 volts to the lights. Good luck!
where is the fuse box located on a acura
On the left side of the brake underneath the dash
the fuce for the brake lights is located in the kick panel, witch is also located on the drivers side left were your feet rest when you drive, also this is known as the fuse panel. you will need to remove the 3"x3"cover in order to get to it
10mm