what is the timing marks on the camshaft what is the timing marks on the camshaft
According to the Gates website ( they make timing belts etc. ) the ( 2.0 liter engine ) in a 2002 Daewoo Nubira ( is an interference engine )
Is your timing belt broken?
How to replace the timing belt for car daewoo nubira1 -step by step
Every 60,000 miles
every 60,000 miles
Less then 60,000km
You can find a camshaft positioning sensor and any other Daewoo parts through Lipscomb Mitsubishi. How to change it I don't know if anyone has the answer please E-mail me --I have a 2000 Nubira (2.0L engine) and the camshaft position sensor is located inside the timing belt cover, on the passenger side of the engine, and behind the timing belt. The right engine mount bracket has to be removed so make sure you support the engine first--the alternator seems to have a pretty stout bracket to place the support under. The sensor is located towards the very top, behind and between the two camshaft sprockets/gears.
Line up the timing marks on both camshaft sprockets so that they face each other. And line up the crankshaft pulley mark with the mark on the engine block.
Under the timing belt cover, sensor runs of tooth wheel on timing belt crank cog. job and a half.
The water pumb is driven by the timing belt. When looking at the front of the car, the front of the engine is on the left. The water pump is located at the bottom left of the engine.
Check the crank shaft pulley