your balancer is bad. balancers are in two peices pressed together by a thin layer of rubber in between the two .
It is located behind the crankshaft harmonic balancer pulley on the bottom front of the engine. The right lower splash shield and harmonic balancer pulley must be removed to replace it.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
That should be at the front of the engine by the crankshaft pulley / harmonic balancer
Crankshaft Pulley !
Yes, all cars do. It is the crankshaft pulley assembly...the biggest pulley, typically, at the very bottom of the engine.
Yes, located toward the bottom ot the engine at the end of the crankshaft. Mazda used an integrated harmonic balancer/belt pulley.
the harmonic balancer is the crankshaft pulley approx6 or 7 inch diameter lower pully center of engine the serp belt is driven by power pulley also have a retaining bolt in center
On any motor, the harmonic balancer is on the front of the crankshaft. It is what the pulley is bolted to.
AnswerThe crankshaft position sensor should be located on a small metal bracket very close to the harmonic balancer which is attached to the end of the crankshaft. If you are having trouble locating the harmonic balancer, it is the lowest pulley on the passenger side of the engine, in the centerline of the engine.
The crankshaft damper is behind the crankshaft pulley.
the crank shaft is at the very bottom of your engine the quickest way to get to this is by removing the oil pan
Remove belt, remove crankshaft bolt with air impact tool, remove balancer pulley with a balancer puller. Then you will be able to get to it.