It depends on your hood and grill design.They changed the front end in 1993-1994 and so you must get the correct ones.the newer hoods dip down in the middle and the older ones are straight across. It depends on your hood and grill design.They changed the front end in 1993-1994 and so you must get the correct ones.the newer hoods dip down in the middle and the older ones are straight across.
Every 60,000 miles in a 93 Mazda Protege
Look at the rear or side of the oil pan
The horn is behind the right headlight. It looks like a black drum or rubber plate. * on my '93 it is mounted on the firewall passenger side behind the intake manifold. The horn is behind the right turn signal. If you remove the right yellow turn signal light, it's right there.
Replacement of the heater core on a 1993 Mazda Protege is going to first require the removal of the entire dashboard. Once that is removed then the heater control box will need to be removed and disassembled in order to get access to the heater core inside.
a manual will help with diagnosis and repair, and a shop manual should be available at the local library in the reference section for FREE, make copies of the right pages, good luck...:)
Follow the plug wires back to the distributor cap. On my 93 DX it is on the drivers side of the engine block underneath the air intake assembly.
First what is wrong with you headlight switch on your 93 topaz.
yes
On the pinch welds, or frame.
I disabled the alarm by removing the piezo electric buzzer located inside the fuse box near the clutch lever. * on my '93 I just pulled the fuse. It is so annoying. - TWO780a
No
== == You need to call a professional lock smith, who has the training and the proper tools to do this for you. try a thin coping saw blade, cut off end at an angle with wire cutters, slide it in along side key twist and pull