EGR Systems
Ford Explorer
Nissan Maxima
Ford Ranger XLT

Can you replace a Ford 4 liter engine without an egr valve with one that has a egr valve?

121314

Top Answer
User Avatar
Wiki User
2006-06-08 13:07:11
2006-06-08 13:07:11

You could transfer the upper intake manifold from the old engine to the new one one, and voila! you now have a non-EGR engine!

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The head has to come off to replace a valve. That'a a pretty big job.

User Avatar

what year, and which engine? Note: if it is newer year, there are two 3.0 liter engines, a 24 valve and a 12 valve. 2000 3.0 liter engine 24 valve

User Avatar

The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.

User Avatar

When facing the engine, you'll notice two small fittings on either end of the valve cover. The PCV valve is the one on your left. Unscrew the plasic cap and replace the valve.

User Avatar

The PCV valve is located in the rear valve cover next to the firewall. It can be reached and changed without rotating the engine forward although it is a bit of a struggle.

User Avatar

The 1998 Dodge Grand Caravan 3.8 liter engine EGR valve can be found on the top of the engine. The EGR valve will be near the back of the engine.

User Avatar

There is no PCV valve on the 2.2 Liter engine.

User Avatar

2000 SEwhat year do you have, and do you have a 3.0 liter 12 valve engine, or a 3.0 liter 24 valve DOHC engine?12 valve

User Avatar

The EGR valve, on a 2004 Ford F150 5.4 liter engine, is located on the top of the engine near the back. The valve is difficult to identify without prior mechanical knowledge.

User Avatar

The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.

User Avatar

A 2002 Dodge Stratus with a 2.7 liter engine does require an EGR valve. This valve can be found near the top of the engine.

User Avatar

Check the VIN... serial # on engine... valve covers labeled... call a dealer...

User Avatar

Yes, it is on the center of the rear valve cover.

User Avatar

on the right hand valve cover about halfway back.

User Avatar

The EGR valve is located in the center of the engine on a F150 Lariat 5.4 liter. It is near the firewall.

User Avatar

If you look at the 8th " character " of your VIN : " X " is the 4.0 liter EFI , which is an over head valve / pushrod design V6 engine " E " is the 4.0 liter SOHC , V6 engine " P " is the 5.0 liter V8 engine , which is also an over head valve / pushrod design

User Avatar

How do you replace valve stems and guides on a 1989 Jeep 4 Cylinder engine?

User Avatar

do you have the 3.0 V6 12 valve engine, or the 3.0 V6 24 valve DOHC engine? 3.0 v6 12 valve

User Avatar

over head valve ( also known as a pushrod engine ) The Ford 4.0 liter EFI engine is an over head valve engine ( that's what I have in my 1995 Ford Explorer )

User Avatar

where is the valve located on the 2002 ranger 4.0 liter 6 cyl?

User Avatar

Yes the 2.2 liter 2001 Chevy Cavalier does have an interference engine. This means the valve and pistons share the same space in the engine.

User Avatar

In a 2001 Ford Mustang : The 3.8 liter Over Head Valve , V6 engine ( and in the GT version , the 4.6 liter SOHC , V8 engine )

User Avatar

On the engine family .. LTK 3.0 T5 FCC1 there is no PVC valve on 1990 Mazda MPV

User Avatar

The 2001 Pontiac Grand Am 2.4 liter engine PCV valve is located on the firewall. The valve will be on the drivers side firewall in the engine compartment.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.