if the blazer is 4x4 and the s-10 has a 4.3 engine then the answer is yes
Do I have to drop the maliford to take out the transmission?
A 1983 Chevy Blazer transmission will hold 12 quarts of transmission fluid. The manufacturer recommends using a. SEA certified transmission fluid.
How many qt dose it take to change transmission fluid in 1995 blazer 4.3
I thought I could remove and replace the transmission in my Blazer, I did get it out but I didn't want to put it back in so I paid a local shop to come and get the blazer, transmission, and all the parts that had to be removed to get the transmission out and finish the job. I would suggest that since you are asking this question, maybe you would be better off going to a transmission shop in the first place. Mine is an automatic, a standard transmission would be much easier.
dextron mercron
Blazer does not take off like it should. sluggih slow take off then after it gets going it does wee.
Either the engine or the transmission has to come out to replace the torque converter.
A/T uses Dexron III
take it to a transmission shop
About 10 quarts
Take the positive cable off the battery, then you have to remove the inspection shield on the transmission and then take the two bolts out of the starter
Five on a filter change, or 12 when dry from an overhaul.