For the rear? Pop the trunk, look on the inside opposite the brake light there should be 4 plastic wing nuts (3 large, 1 small), unscrew the 3 large ones and take off, slide the whole housing out and from the car, you now have access to the light sockets, turn them (some have a clip to keep them in place, squeeze this while turning if they have it) remove socket from tail light assembly. replace bulb with 2057 and put it all back together. about a 5 min job. Hope that helps someone.
turn signal flasher
How do I replace turn signal on a 1992 Chevrolet caprice classic I want to learn how to do it myself
how do i change driver side turn signal bulb on 1992 dodge caravan?
replace the combination switch on the turn signal stalk
Turn signal relay needs to be replaced. If you turn on the hazard (emergency) switch, all the signal lights should come on. This says the lights are okay.
No gurarantees, but most car signal flashers are plugged in at, or near the fuse box - try there.
Which transmission? 3T40 automatic has 3. Getrag manual has 5.
your flasher is bad replace it It's probably the turn signal signal switch in the steering wheel hub. They're junk from the factory.
may have a bad signal switch,or may be a blown fuse
When changing the corner lights on a 1992 Acura Integra first find the housings for the corner lights. Pull the old lights off and replace the bulbs.
If the turn signal is working it's either the brake light switch or the turn signal switch.
The signal isn't working? need more info. On mine the side marker lights tend to burn out alot. The seal seems to be ruptured allowing water in and burning the lights out.. many other things it could be. other than that I'm not sure what you are asking.