No. There are 2 U joints, 1 front and 1rear. If they are the factory U joints they are sealed with a plastic meaning no clips on driveshaft side. If you are not of high mechanical ability I would take it and have it done.
You have to replace the whole drive shaft.
how do you replace the drivers side drive shaft and cv joint?
drive universal jount
not possible. the whole drive shaft needs replaced.
very carefully!
It's part of the driveshaft outer cv joint. Replace the shaft as per 2002 Clio 1.5dci
You probably mean U - joint (universal joint)! Located at each end of drive shaft or axle and possibly in the middle of drive shaft.
It's usually much more inexpensive to replace the entire drive shaft than to repair a worn cv joint. The new drive shaft will come with new cv joints and new boots.
You probably mean U - joint (universal joint)! Located at each end of drive shaft or axle and possibly in the middle of drive shaft.
tool for drive shaft
It is a staked joint drive shaft. It is not meant to be serviced.
you can replace power stering pump without moveing drive shaft but its fiddly. to remove drive shaft undo 30mm nut in centre,undo bottom ball joint and pull strut out of way be ready to catch gear box oil.