On American cars the positive lead from your cigarette lighter is in the center of your socket. The adapter plug has the positive lead on the tip of the adapter and the negative lead on the side of the adapter. You need to use a volt-ohm meter to find out which wire comes from each lead. (You may be able to open the adapter and follow the wires that way).On the c.b. radio the positive lead should be red. This will connect to the positive lead on the adapter. The black lead on the c.b. radio is the negative lead. This will attach to the negative lead on the adapter.P.S. Usually the adapter will have a fuse built into it to protect from incorrect wiring.
Yes, it will but it depends on which type of TV you have and you may need to get a adapter. You can get one from Walmart for about $60-$100
Well yes and no. If you are an American not nessicarily, as they use two types of plug, your long thin plug and a two narrow round one. The standard American one was in some of the hotel rooms but not in others so it would be wise to get an international adapter.
You can stop at most major electronic stores and get a universal outlet plug. With respect to your power needs, you have two considerations when traveling...1) is the power (voltage and frequency) compatible, and 2) will you need an adapter? Most modern electronic chargers such as cell phones, cameras, electric shavers, etc., will accept any of the normal range of voltages (110-240) and frequencies (50-60 Hz)...but be careful as some may not. Your camera charger should have the acceptable voltage and frequency ranges printed on the back. Italy uses 230 volts and 50 Hz. If your camera charger will accept these values, then all you need to do is to find an adapter. If not, then you need to find a power converter and an adapter. Usually, anytime you buy a power converter it will come with a number of adapters, but if not, you will have to purchase one separately. If all you need is an adapter, they can usually be purchased at any of the major electronic stores such as Fry's, Best Buy, Radio Shack, etc.
Yes, there is a huge difference. If you use a valve thread for an adapter instead of valve outlet, you'll be in a world of hurt. That's because the adapters have the correct threads! If you use the outlet, you might cross-thread and you don't want to do that. If you turn around twice hopping on one foot and clap your hands twice, it should be ok. But that's only if you spit on the valve outlet before you thread in the new valve adapter.The preceding is a JOKE. Please post intelligently to get intelligent replies.I don't know if you're talking about a CAR or a WASHING MACHINE or a SPACE SHUTTLE.Answer 2Actually, a valve adapter should connect directly to a valve thread, that is what the adapter is for. Usually, the valve outlet connects directly, but if you don't have a plug you need the adapter to connect two outlets together. Of course, you really should just use the assembly properly with the plug end connecting to the outlet.
I've recently purchased the ASUS T100, and I love it! But what I'm wondering is do you need a wifi adapter to play any PC games? Can someone please tell me it would be exelent! Like, Games: Roblox, Cube world, minecraft, Animal jam, Wizard 101, Pirate 101, and Pirates of the Carribean.
You will need to replace your Asus Transformerpad T100 battery if it continues to drain the same amount as if it was in use. Batteries should drain less, not the same, while in sleep mode.
You need a VGA adapter to play PS2 games on an old monitor.
Yes! you need to use a power adapter as well a plug adapter in Egypt from the UK.
Do not directly plug your controller into the computer. You will need an adapter for connection.
I would need more details to answer this question fully, such as your specs. However, I have an Asus and it works just fine for me.
You need a gamecube controller, classic controller, or a N64 controller with an adapter.
your need a xbox adapter from game for around £40
You will need the Xbox wireless adapter, an installation disc, and an Xbox. Install the software onto the machine and plug the adapter into the USD port to install.
You can just disable device, there is no need in disconnecting the G adapter.
You need no adapters.
Raid adapter