Yes you do.You need to put the four bolts back that where hopefully there when you got your washer. yes !
no
drum capacity for matytag washer model # LAT9416AAE
A washer uses electricity to power the motor that turns the agitator (or drum) and pumps out the water.
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
If your clothing is coming out still-dripping wet, the spin cycle is not engaging. Try using a different setting on the washer. When you hear the spin cycle begin to engage, peek into the washer and see if the drum is actually spinning. DO NOT put your hand in the machine and try and start the drum spinning. If the drum does not spin up on its own, then you need repair on the washer. You might also be over-loading the drum. Have it looked at, but it is often an easy fix.
your filter is probably plugged or your fluid is burnt Additional info by Mandilon: If filter were clogged-up it wouldn't move in either direction. Burnt fluid; -ditto. The 'front' drum clutches are burned-up. The front drum clutches are 'applied' for all forward gears. Only the rear drum clutches and the reverse band are applied for reverse. Replacing the front drum clutches and seals will 'get it moving' thought it really needs an overhaul.
After jacking the car up and removing the front tires, remove the wheel-bearing dust cap, remove cotter pin, then remove nut, turning it counter-clockwise, then remove the large washer. Now, tap the top of the brake drum with the palm of your hand, and the front bearing should pop out. Then slide the brake drum off. If the brake drum does not come off, you will have to turn the brake shoe adjuster inward. The brake shoe adjuster is located in the slot in the back near the bottom ball joint. Pull brake drum off.
There drum, the front are disc and rear are drum
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
Front disc, rear drum
The drum is not moving
front disc, rear drum.