jack up wheel you want to test with one hand under bottom of tire and other hand on top of tire, try to move wheel up and down, in and out if bearing is bad or needs adjusting, u will see and feel movement in wheel
bad bearing
Step on the clutch,mover the gear lever out of Park to 1st gear.
If the water pump turns freely without any roughness or bearing play,it should be ok to reuse.Probably the main cause of failure on water pumps shortly after belt replacement,is simply overtightening of the new belt.
yes they will turn freely in neutral but still kind of hard to turn due to rear end gears.
Rolls freely in neutral? Bad transmission?
It rotates freely until it is required to do work. As soon as a load is placed across the output more effort will be required to rotate the Dynamo.
It would sound like the throw out bearing is bad.. That is usually replaced with the clutch and pressure plate. The throw out bearing applies pressure to the pressure plate and releases the clutch disc. When not applied, the bearing spins freely, and a noise would indicate a dry bearing.
from south to north
1.8 m
From an Engineering standpoint, it is called a BEARING. In a cheap compass it is a simple PINPOINT in the Base, and a CUP on the bottom of the Needle.
Very carefully use your hand to spin the fan. If it moves freely, power isn't getting to it or the motor's capacitor is no good. If it doesn't turn freely and it's hard to turn, then the fan's bearing are worn out and the fan is no good.
Neutral questions do not suggest an answer and are phrased in a way that allows the respondent to freely express their thoughts or opinions. Leading questions, on the other hand, steer or prompt the respondent towards a particular answer or perspective, potentially influencing their response.