Want this question answered?
If the 1990 Chevy Lumina is blowing the DIS 10 Amp fuse when the ignition is on, check to make sure that all wires coming from this fuse are grounded properly. Also check to make sure the starter is wired properly. There could also be a loose wire in the dash near the ignition.
check emc fuse and the fuse next to it
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
This could be a bad ignition switch, ignition relay, or ignition fuse.
Unplug the fuse labeled "fuel pump"
You likely have a frayed wire to the stop light.
Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,
Check or replace the socket
There seems to be a short to ground in the wiring somewhere.
Try pulling the master fuse for the ignition to reset the alarm.
Hi, The condenser or the coil could be bad, i.e. a dead short or the ignitor, the main relay could also be shorted . Those are what I'd look at first as they are all protected by the 15A fuse.
sounds like you have a broken ignition wire between ignition switch and fuse box