Bad wheel bearing? Most likely a loose frt end component, Or the hub could be bent due to an impact.
yes
check you motor mounts and trans alignment your pulley shouldn't wobble with a new assembly
If you are referring to the steering wheel wobbling whilst driving along, then you probably have one or both of the front wheels out of balance. If the wheel wobbles at a certain speed then it may be a problem with the front locking wheel hubs or a bearing problem.
Failed water pump bearing.
It's loose ! the bearing is loose, the shock is dead, the ball joint is worn.
If you hear a grinding noise when rolling forward that worsens around corners, that is a good sign that the bearing is failing. Watch for uneven tire wear or a steering shimmy that worsens as the bearing fails. Jack the car up and try to wiggle the tire. The tire should spin but not wobble in any way. If it does wobble, the bearing is failing. The shake test is easiest if there is no noise.
Bad tire? Bad wheel bearing? Bent wheel? Bent axle?
Worn tire? Tire and/or wheel out of balance? Bad wheel bearing? Bent axle?
Could be the clutch is gone. If that is the problem, you can have just the clutch changed, but don't wait too long. If it is the bearing, then have to change the compressor. When it is running, you will see the clutch wobble. The clutch can be changed with the compressor on the car. There is room.
Tire could be unbalanced, wheel bearing shot, lower ball joint bad.
Something is wrong ! - wheel may be loose, tire may be separated inside or wheel bearing is shot.
Wobble Wobble was created on 2000-03-28.