WARNING!
NEVER re-use head bolts for this engine, EVER!
These head bolts are designed to stretch on tightening and are one time use only!
If you do not buy new head bolts (set of 10 for $30) you will risk a broken bolt or a blown head gasket.
For the 1.8 diesel or 2.0 petrol engine 5 steps.
Use a good quality torque wrench.
step 1 25 Newton metres
The folowing steps are by angle. If you do not have an angluar torque wrench, use a cotton tip dipped in white-out (liquid paper) to put a small white dot on the head of each bolt at the 12 O'clock position,
step 2 90 degrees (3 O'clock)
step 3 90 degrees (6 O'clock)
step 4 90 degrees (9 O'clock)
step 5 25 degrees (10 O'clock)
working in a spiral movement tighten the bolts in this order:-
timing belt side 8 4 1 5 9
7 3 2 6 10
It is quite normal for these bolts to feel rather strange (spongy) on tightening because they stretch. See warning.
I need a picture of a leganza deawoo head bolt tightening patern
What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and what is the proper torque order
18 ft in sequence,then additional 90 degrees,then additional 90 degrees,then additional 90 degress
65 foot lbs for all daewoo 2.0 and 2.2
http://wiki.answers.com/Q/What_are_the_cylinder_head_torque_specs_for_daewoo_lanos_98 wwwstlouisparking.com .to Answering "Need timing specs for a 2000 daewoo lanos with the 1.6 dohc engine also need the torque specs for the head too
The head bolt torque specs on a daewoo lanos with the 1.6 liter engine arestep 1 18ft lbs step 2 turn all bolts 70 degrees step 3 turn all bolts additional 70 degrees and step 4 turn all bolts 30 degrees that is what came straight from the torque manual
18 ft lbs then with torque angle meter on wrench turn 90 degrees 3 times. Use new head bolts they are torque to yield
Torque settings daewoo espero cylinder
i need how much pression (torque) for head daewoo nubira 2001 2.0
Torque specs
head torque specs for 2002 honda rancher
What is the head torque specs on a 1997 Honda CRV