The number 1 cylinder is on the driver side. The number 2 cylinder is on the passenger side , very front cylinder of block, the cylinders are as this 1-3-5-7on drivers side 2-4-6-8 on passenger side starting front to back
The firing order is 1-8-4-3-6-5-7-2
no a dodge 318 is internaly balanced and a dodge 360 is externaly balanced the converter, hermonic balancer and the flywheel are not enterchangeable
Pass side 2-4-6-8 Driver 1-3-5-7
318 and 340 are 2.500 360 are 2.800 Hope this helps
5.9L is 360 cubic inches 5.2L is 318 cubic inches
no heads and intake are different form a 360 to a 318
Sure, it can be done.
if your 67 had a 318 engine in it from the factory the 360 should bolt right in.
On the driver's side of the engine block you should see either 318 or 360 stamped.
yes
same block, should fit
No.
The 318 provides about 230 HP while the 360 provides about 190hp