0
How can you diagnose fix a rear wiper hanging loose in Sienna 2001?
Wiki User
∙ 17y ago
Take it to a qualified mechanic He has to take the entire lift gate apart to find out Before taking it to a mechanic, do check if the problem is with the wiper blade/arm, or with the motor. The wiper arm has a nut which holds it to the motor. To access this, there is a cover at the end of the wiper arm (the other extreme end from the rubber blade). Flip this cover and check if the nut is tight. If not, tighten it. This might be the reason for the blade hanging. If it still continues to sag, open the nut and take out the wiper arm. You should be able to see the bolt from the wiper motor protuding out. Rock it to see if it is wobbling and shaky. If it is, then the plastic housing of the lift gate will need to be removed. It can be done, but does require mechanical proficiency
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How to change rear windshield wiper on 2005 Toyota Sienna?
The 2005 Toyota Sienna had a production change mid-year that affected the wiper configuration.Step 1 is to measure the length of the blade on your vehicle. "Early" Production 2005 Toyota Sienna: 14" Special Rear Wiper Blade"Late" Production 2005 Toyota Sienna: 16" Standard Rear Wiper BladeStep 2 is to be sure you get the right replacement wiper blades.Step 3: The replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions
What is the cause of wiper light staying on in Toyota Sienna 1998 Model?
change the wiper fluids, or get it checked out
Where do you refill the rear wiper fluid on a 2001 Toyota Sienna?
My 2003 Sienna has one tank that is for the front and rear window. You might have a problem with your pump or something else. Does your front wiper work?
How does the rubber insert on the rear wiper of the 2004 Sienna come off?
The rubber insert on the rear wiper of the 2004 Sienna comes off when you pull the insert away from the wiper while squeezing the tabs on the back of the wiper. The entire rubber insert is replaced when you squeeze the two tabs at the back of the wiper and slide the new insert into place.?æ
How can I fix my 1998 Grand Am windshield wipers from when they're not moving at all?
You have to diagnose it first. With key on and wiper switch on, listen carefully, if you do not hear an electric motor running check the fuse. If the fuse is good and the wiper motor is receiving power and ground, the wiper motor assembly is probably bad. If you hear a motor running but nothing is moving, the wiper transmission assembly is stripped or the linkage is loose and came apart.
Change windshield wiper 2000 Toyota Sienna driver side?
Step 1 is to be sure you get the right replacement wiper blades. The 2000 Toyota Sienna takes 24" driver side, 18" passenger side replacement windshield wiper blades on the front and a 17" replacement rear wiper blade. Step 2: As far as installation, the replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions.
What is the wiper blade size for a 2005 Toyota Sienna?
Drivers side 26'' Passenger side 19''
How do you release front wiper blade from wiper arm on 2004 Toyota Sienna?
The 2004 Toyota Sienna has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
How do you replace rear wiper blade Toyota 2004 sienna?
Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.
WHAT size wiper blade toyota sienna 2003 used for the back and front?
The 2003 Toyota Sienna wiper blade sizes are 24" drivers side, 18" passenger side and a 17" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
How do you change the 2004 Toyota Sienna windshield wiper?
The 2004 Toyota Sienna has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
What are the wiper blade sizes on a 2009 Toyota Sienna?
The 2009 Toyota Sienna takes a 26" drivers side, 19" passenger side and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
