0
How do I remove the headlight assembly from a 1998 grand am gt?
Mockason
This is for the passenger side headlight assembly in a 1998 Grand Am SE. Fairly certain they are identical to the GT. The driver's side is has a plastic cover that must be removed first, so the setup underneath may or may not be different... Remove the three 10mm hex bolts from the top of the headlight assembly holding it to the vehicle. The middle bolt has a bracket connecting it to the vehicle by a fourth hex bolt, which you may need to loosen to move the bracket out of the way. Pull the headlight assembly forward until you can access the bulbs. They can be removed from the assembly by a quarter turn, then unclip the faulty bulb and replace.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How to remove the headlight assembly in a 1998 Mitsubishi eclipse?
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
How do you remove the headlight assembly located on a 1998 Cadillac cts?
There is no 1998 CTS
How do you remove headlight assembly on a 1998 Jeep Grand Cherokee?
Here is a guide to follow: http://98jeepbuild.blogspot.com/2009/06/cant-see.html
How do you change a headlight on a 1998 Pontiac Grand Am?
are you trying to change the entire headlight assembly? or just the bulb.
How do you remove headlight assembly 1998 Lincoln town car?
you have to remove the black plastic cover over the headlight and there are 3 tent lik stacks you pull up an out and your headlight is out
How do you replace the headlight assembly of an Acura Integra 1998?
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
How do you replace head light bulbs on 1998 Chevy s-10?
Open the hood and notice the two black locking tabs sticking up behind the headlight assembly. Remove those two tabs by pulling on them straight up. This will allow the complete headlight assembly to come out the front. You can now remove the headlight bulbs from the headlight assembly.
How do you remove head light assembly on 1998 gm pick up truck?
Open the hood there are to locking pin above each headlight assembly. Turn them you unlock them and pull the up. Once they are removed the headlight assembly can be removed.
How do you change the horn on a 1998 Grand AM GT and where is it located?
The horn is located behind the drivers headlight. To remove unplug harness, undo bolt in bumper assembly behind drivers headlight (must be removed first), and it slides out. To install new, follow steps in reverse.
How do you remove the headlight assembly located on a 1998 Oldsmobile Aurora?
BRING SOME TOOLS TO THE JUNK YARD--GO PRACTICE.......
How do you change a headlight bulb in a 1998 Chevy s-10?
Standing in front of the bad headlight assembly with the hood open notice the two black tabs sticking up behind the headlight assembly. Those two tabs lock the headlight assembly in place. Remove the tabs by wiggling and pulling straight up. Once the tabs are out you can wiggle the complete headlight assemble out the front. Now you can remove and replace the bad bulb.
How do you replace the headlight assembly located on a 1998 Volvo S70 t5?
Open hood, look at the back of the assembly and locate the 4 hex bolts that hold the unit in place. Remove the bolts, slide the unit away from the body, and disconnect the wiring harness. You can also access/remove the turn signal unit when the headlight assembly is removed by sliding it forward and disconnecting the wiring harness. Reverse the process to install. This reply is good for both the 1998 S70 and 1998 V70 with headlight wipers. Note that there is a tab along the bottom edge of a headlight assembly for the wiper blade to rest upon.
