Valve Clearence Measurement steps:
turn the starter pully conuterclockwise with a wrench
Vlave clearence must be measeured when the engine is cold to touch
Allign the "T" mark on the fiywheel with the stationary pointer on the crankecase cover When the "T" mark is aligned with the stationary pointer the piston is at top dead center (TDC)
Measure the valve clearence using a feeler gauge
intake 0.05 - 0.09mm (0.002-0.004 in)
exhaust 0.11-0.15 mm (0.004 - 0.006 in)
Jy43hpa05sa081604
what about it?
my breaks stuck after we got the four wheeler back from a crapy mechanic. how do i get the drum off to free the breaks ?
I have a 86 moto4 80 all aftermarket... On the road it gets up around 55-60
how do i set the timing on a 1985 yamaha 200 3 wheeler
If you're sitting on the 4-wheeler, it is on the bottom of the left side of the frame, just in front of the footrest at the same height. It's small, so you'll have to really clean that area.
If you're sitting on the 4-wheeler, it is on the bottom of the left side of the frame, just in front of the footrest at the same height. It's small, so you'll have to really clean that area.
1985 Yamaha YZ 80 and the stunts were done by a stunt double on a 1985 Yamaha YZ 250
If you're sitting on the 4-wheeler, it is on the bottom of the left side of the frame, just in front of the footrest at the same height. It's small, so you'll have to really clean that area.
asdasdasda
1985
It is a 1985 Yamaha YZ80