To fix a 95 Dodge Dakota with no brake lights, first check to ensure the fuse has not blown. If the fuse is good, check to ensure the brake light bulbs are not burn out.
Check bulbs Check fuse Check the operation and adjustment of the stop light switch
check fuses, check brake light switch behind brake pedal.
how do you fix transmission on a dodge ddakota
i have the same problem.did you find out what it was? email@example.com
Check the fuse, the bulbs, and the brake light switch.
take it to a garrage
If all the bulbs are good then it may be a blown fuse or a defective or mis-adjusted brake light switch.
check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.
The brake lights in your 1983 Nissan pickup truck are controlled by the brake light relay switch. When the brake light relay switch malfunctions the brake lights will stop working.
check your fuses and the brake light switch above the pedal
The brake light switch must be broken or out of adjustment.
buy a new one
Check the brake light bulbs, Check the brake light fuse, Check the brake light switch, In that order.
Fix your brake lights and this problem will go away. Didn't know the brake lights were out did you? May be a fuse or the switch.
Adjust or replace the brake light switch.
take to trans shop, its electronic
This is my son-in-laws truck. I have to fix it
The same thing happened to me. It's the brake lights switch either under or over the brake pedal. The same thing happened to me. It's the brake lights switch either under or over the brake pedal.
my brake lights stays on wile driving how can i fix it
check your cables, fuses and your float
it is probobly the abs/speed sensor located on top of the rear differental its an eazy fix, it can be done in a parking lot and it only costs about $37 at advanced auto
brake light switch at the top off your brake pedal the little rubber bumber is worn out or the switch is out.... very easy fix
The wheel cylinder has failed and will need replaced.
Bad switch. Easy fix- cheap part!
check the brake light relay under the hood