You will probably be better off replacing with a new one - I've had problems with rebuilds
how do i know the master cylinder is bad ?
You don't. You repair it
how to replace master cylinder on 1996 buick regal
how do i replace the maser cylinder on a 1995 GMC Sierra
how do you locate the clutch master cylinder and check the fluid level of the 1995 ford escort
In order to replace the master cylinder with ABS attached to the master cylinder on a 1995 Grand Am you will need to complete the following steps: Disconnect the negative battery cable. Locate the master cylinder which is attached to the drivers side of the firewall. Remove the ABS brake line from the master cylinder using a wrench. Disconnect the fluid hose from the master cylinder using a wrench. Unscrew the nuts that hold the master cylinder in place. Remove the master cylinder and install a new one. Reattach the fluid hose to the master cylinder. Reattach the ABS brake line to the master cylinder. Tighten all the nuts and bolts and reconnect the negative battery cable.Once all of these steps have been completed you can be sure that your master cylinder has been properly replaced and is ready for use.
on tims HEAD
do not. buy a used one.
If the Master Cylinder is defective then replace it.
The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.
Does my 1995 Toyota Paseo have a clutch cable
Should be right beside the brake master cylindar.