three screws accesible under dash on passenger side.
Look at the passenger side firewall Some are removed from the exterior Some are removed from inside behind the glove box
Under the dash on the passenger side.
Passenger side under the hood.
Remove the wiring harness from the back of the blower motor in your 1993 GMC 1500. Remove the blower motor retaining bolts. If the new blower motor does not have the fan attached to and you will need to remove the fan from the old blower motor. Reverse the process to install the new blower motor.
No.No.
Under the dash on the passenger side.Under the dash on the passenger side.
A 316 motor is not a direct swap with a 360 in a 2000 Dodge Ram 1500. Both engines are very similar but have different connectors and mounts.
Not easily. You will need a different computer and wiring harness.
Some of the Rams had a recall on the blower motor wiring.I would check the wires at the blower first.If the wires are in good shape,then you may need to replace the blower.
the blower motor reducer in the box under the dash on the passenger side its a little white ceramic lookin thing. someone told me they go bad when the blower motor is going bad
How do you replace the heater blower motor resistor on a 1998 gmc serria 1500 p/u
The most likely cause is the blower motor, if you unplug it and the fuse doesn''t blow you will have an answer.