what bulb? if you need to change exterior front or rear or indicator? let me know.
On the 2000 es 300, remove the screw that connects the turn signal plastic cover to the main headlight cover, the turn signal cover can then be removed by pushing forward, there is a clip that will release and the cover comes loose. Disconnect the lamp holder by rotating counter clock wise, then the bulb is exposed. Check the bulb and contacts, replace bulb if needed. Check the operation before re installing the turn signal cover.To access the screw, you have to first remove the plastic moulding across the front of the engine compartment under the hood.
If its the front turn signal you open your hood and partly remove the black plastic cover on top of your headlights. Then you should see a screw on that screws on your signal light. Remove the screw and take off the the signal light and then remove the bulb.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
How do I install a turn signal switch for a Chevy 2000 Impala? WHere is the old part that I need to replace?
Drop the tailgate and look at the side of the lens for screws.
This is the turn signal bulb in the front bumper - passenger's side.
HOW DO YOU GET THE LEFT TURN SIGNAL BULB OUT ON A 2000 PONTAIC FIREBIRD
I am trying to do the same thing on my 2000 jetta, did you ever get a answer? I am thinking the headlight assembly has to be removed, and even that is not a simple thing I managed to get to the passenger side's front turn signal bulb. To get to it, you have to pop off the vertical rectangle black plastic cover besides the headlight cover. To do this, press down the grey tab on the top of the plastic cover, while prying the plastic cover out on the top. Once the plastic cover is popped, wiggle it to get it completely off. Now you can reach the turn signal bulb assembly. Wiggle off the wires from the bulb assembly, then rotate the bulb assembly counter clock-wise (looking at it from the back) to pull it out. Now you just need to pull the metal tab out slightly while pulling the bulb out of its plastic assembly. The answer above is complete and easy to do at home. I wish I would have read it BEFORE I started the replacement. Thanks for the help!
a Phillips head screw driver
Replace the Flasher Relay.
Open the trunk, theres a plastic cover over the light assembly, with 3 plastic screws that turn a quarter turn then pop up, pull then out, pry the cover off, find the back of the bulb housing. twist the bulb housing 1/8 turn and the bulb comes out; replace the bulb and reverse to finish the process to finish.
You must buy a complete signal mirror cost around 200.00