well we have a 91 stanza and ours is located under the glovebox dash u have to take everything off to get it out try checking there good luck
how to replace a heater core on a 2003 Nissan Altima 2.5
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
you may have a bad thermostat,replace and see.
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
The dash has to be removed to gain access to the heater box. The heater box then comes out and is split open to replace the core.
The entire dash assembly must be removed to gain access to the heater core.
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system. There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
By asking acablest to do it.
You pretty much have to remove the entire heater box under the dash on the passenger side
First remove the dashboard to access the heater box and core! Then reversal of strip down to rebuild.