There is a special tool for that. Try a GM dealer's service center. They should know which one it is.
Remove belt and tensioner should just be bolted to engine
Maybe $100 tops....
the diagram is in the left corner closest to the passenger seat
You don't say which engine or year but see my post under "How do you change a serpentine belt on a 93 Buick Skylark" for a possible answer.
Go to a GM dealer's parts department or service department. They would know.
The 1988 Buick Skylark 2.3 liter engine serpentine belt tensioner pulley is held in place with a single retaining bolt. The retaining bolt will be in the center of the pulley. Remove the retaining bolt.
Most serpentine belts can be changed on the side of the road. It is usually an extremely simple procedure.
It's on a sticker where the shock absorber is. If it's missing, a GM dealer's service center will have it.
Loosen the tensioner pulley on your 1992 Buick LeSabre. Take the serpentine belt off. Put the new serpentine belt on and tighten it down with the tensioner pulley.
If it's a V-6, it's at the bottom of the serpentine belt. There should be a diagram of the belt on a label where the passenger's side shock absorber is, under the hood.
I need to know if I need a special to to change my serpentine belt on a 2001 Buick Regal
need a 2006 buick lucerne belt diagram
you do not adjust tension on a serpentine belt the tension is automatcally adjusted if the belt is loose, replace the belt SOME TIMES THE TENSIONER CAN BE WEEK ALSO.
Done automatically by belt tensioner
Its a left hand thread hold the other side of the metric cresent wrench
Your Explorer has a serpentine belt tensioner which keeps the proper tension on the serpentine belt unless the tensioner has failed.
u do not adjust belt tensioner if belt is loose, u need to replace belt as tensioner works automatically
If the tensioner isn't tight enough it's probably the spring. You can purchase a serpentine belt tensioner to replace the one that has become weak.
The belt tensioner is self-adjusting.
replace tension put it on
Should be automatic through the spring loaded belt tensioner
You can't. it has an automatic self adjusting belt tensioner on it.
You don't, it has a spring loaded tensioner, If the serpentine belt is loose the tensioner has failed and needs to be replaced