There is NO adjustment, You must replace the clutch set to bring the pedal back to the right position. You also need to make sure the clutch slave cylinder/ master cylinder is good before replacing clutch assy.
There is NO adjustment. It is adjusted automatically through the hydraulic slave cylinder. Probley time for a NEW clutch kit.
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
The slave cylinder is actually built onto the throw-out bearing. If you have a problem with it you will have to pull the trans.
You will need to remove the transmission to replace the clutch slave.
YOU CAN'T. The clutch is either worn out are the clutch slave cylinder is bad.
You can't, there is no adjustment. Time to replace clutch, slave cylinder or clutch master cylinder. 1 of the 3.
You can't, There is no adjustment. You either have a bad clutch slave cylinder, are worn out clutch parts.
Perhaps slave cylinder, line or fitting leaking?
No.... There is not an adjustment what so ever. You either have a bad clutch slave cylinder / clutch master cylinder. Are the clutch and pressure plate are worn out.
There is no adjustment on that year. You either have a worn out clutch disc or a bad clutch slave cylinder. Could be a bad clutch master cylinder too.
The clutch slave cylinder , for a hydraulic clutch , is inside the manual transmission bellhousing
How do you replace a slave cylinder in a 96 chevey k1500