First make sure surface is smoothe. Then block sand it with a 600 grit, then a 1200 grit or a 1500 grit sandpaper. Apply a rubbing compound, remove it. Finally use a good car wax .
It will tarnish and need to be cleaned or polished to bring back the shine.
Yes It does and it also brings the color out too. Yes it will because when you wash your car no mater how long you had your car bring a little bit is shine.
gel coat is thicker and more durable than paint. any good auto polish will bring the shine back. if you are going to use a electric polisher, make sure you don't go too fast to prevent burning
If the coating was removed from the tiles with the paint then the shine will not come back with out a coating being applied. If the tile finish is still intact then a rubbing compound with a non abrasive pad could bring back the finish. Test first in an inconspicuous area.
Far from it. A piece of moon rock has about the same reflectivity of a lump of coal.
The best way to clean it is simple soap and water, or simple green and water for indoor applications, for outdoors use bleach and water, that's for the cleaning part, as for the shine the only way to bring it back requires a recoat/reseal with epoxy.
Products like Countertop Magic and NuFinish can bring back the shine of your Formica table.
If the shopkeeper is kind enough, bring the disk back to him and ask him to repair it.
Flower, gleam and glowLet your power shineMake the clock reverseBring back what once was mineHeal what has been hurtChange the fate's designSave what had been lostBring back what once was mineWhat once was mine
Remove radiator and bring to a radiator repair shop for new installation
First ensure that the wood is clean and not just built up with old wax and dirt. Yes then mayonaise will bring back the shine. I use it on a table of mine that has some dry spots due to some commercial cleaning oil that I used on an area which left it dull. The mayonaise does the trick everytime. In fact I will never use another polish on wood again.
You fix discs by using a kit with a series of abrasives, from course to light, to wear down scratches - step by step - to a smooth finish. Professional systems use multiple abrasives, consisting of different hardness and shapes (sharp to smooth). Regardless of product or system used, the key is to use a series of abrasives (more than one stage) to gradually bring the plastic back to a polished surface. If you want to remove all scratches on your disc, take a look at the 5-stage Scratch Pro repair kit. It will bring the disc back to its original shine and you will have a kit on hand to fix the next disc. Also do a search for scratch repair to see what is out there in your area. To do a targeted search, use the + sign in front of the search words +disc +scratch +repair