To change door pins on most vehicles, the old pin needs to be cut off with a blow torch. Then, the new door pin is welded in its place.
The bottom of the pins may have to be ground off to be removed. The pins are tapped upward to be removed. The door can be taken off to make access easier, or the door has to be supported to keep pressure off of the pins and to hold the door while the pins are out,
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
Look here http://www.hotrodders.com/forum/99-tahoe-door-pins-136678.html
Just a screwdriver will handle it!
go to youtube.com
You can change the skin. Japan's, on your Oldsmobile automobile, by propping the door up, so it cannot fall. Pound the inch pins out with a chisel and hammer.
need to replace door hindge pins and bushing,how do we get door off safely.
My advice based on experience is to replace the entire hinge assembly.
Hey Lee==Simply remove the hindge bolts and remove the door. Some are welded on and you sometimes can remove the hinge pins. GoodluckJoe
From what I was told, from the guy at the auto store, you can't. You have to replace the entire bracket.
there is page thereAnswergo to www.oversize door hing pins .com Answergo to www.oversize door hing pins .com LMC TRUCK PARTS HAS THEM , also ORIELLYS AUTO PARTS.
If the door is not lining up correctly it is probably the pins and bushings are worn out. Replace the pins and bushings and the door should close correctly. Pin and bushing kits are available from your local auto parts store.