1/2, 3/4, or 1 ton PU? The half ton "fall off" after you take the caliper off For the heavy duty trucks you need to remove the caliper, unbolt the CV shaft axle nut, and remove the wheel bearing, then unbolt the rotor from the bearing
Need to know if this is a 2 wheel or 4 wheel drive S10.
State exact make and model.
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.
Front or rear rotors and 2 wheel or 4 wheel drive, it makes a difference.
Leaving the parking brake on while you drive
Tap on your 1995 Ford brake rotors with a hammer or mallet?æto loosen them. Slide the rotors off. Reverse the process to install your new brake rotors.
if you are driving and you go to stop, then that means that the front rotors are warped. if the front rotors are bad, you will feel a pulsation in pedal while applying brakes. change rotors on front.
How do you change brakes on 2003 Silverado Pick Up?
Jack
Break rotors heat up very fast while drive and stopping, todays technology in my sense isn't the best on rotors. If you have a heavy foot and brake hard, that will contribute to warped rotors. Sudden stops will also case warping. Most brake Specialist (Les Shwab) recommend on new cars, and new rotors to brake easy, (light foot) on your new rotors for the first 1,000 miles of the rotors life. That way they have time to brake in.
2 wheel or 4 wheel drive, front or rear rotors, it makes a big difference.