Want this question answered?
If your Toyota has a manual transmission, the fluid will be put in by removing the gearshift, and literally pouring the fluid into the cavity under the shifter.
What type of transmission fluid does my 1989 toyota pick up truck take, manual 4 speed.
4 quarts
Drain it and change it!
To change the transmission fluid on a 1964 V6 GMC truck, you will need the manufacturer manual.
You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.
To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.
there should be an upper and lower bolt on the underside of your transmission. undo the lower bolt to drain the fluid. undo the upper bolt and put some fluid in to drain the old. tighten the lower then fill to the hole. tighten the upper bolt
There is no top fill tube on the truck... must drain and fill at the transmission... take it to a trany shop..especilly if it is an automatic... should change fluid and filter every 30 to 35K miles
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
The transmission dip stick is right next to the oil dip stick. Transmission dipstick handle is red. Oil dipstick handle is yellow.
GM recommends every 60,000 miles.