well if it is the same as a Pontiac transport you support the front of the van on a jack stand take off the front tire take off the the brake caliper and brake disk and drive them out with a hammer there is a spline at the end of the stud so they wont turn if they are broken use a good punch I have don it like this so i know it works
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
How do you change front tire studs on a 1994 Seville sts
HOW DO YOU CHANGE FRONT WHEEL STUDS ON A 1995 CHEVY LUMINA AUTOMOBILE?
It is on front/rear hub assy - bearing, studs and wheel speed sensor
how do i change the front wheel studs
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
you have to press the wheel studs out of hub after you remove it from the spindle
Trim the wheel behind the studs
"All cars are not created Equal" You need to BClear. What do you have? I have a 1984 chev 1/2 ton 4 wheel drive.
The front wheel hub on a 1994 Honda Civic is connected to the upper control arm and lower. Remove those as well as the axle. Also remove the brake caliper, rotor, and pads. The hub will come off and the studs will then be able to be reached.
On my '90, the rotors are held in place by the wheel studs. I had to press the wheel studs out, then the rotor separated from the hub.
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.