Fuel and Fuel Intake
Fuel Pumps
Chevy S-10
Plymouth Breeze

How do you change the fuel pump in a 97 Plymouth breeze 4-cylinder automatic?

151617

Top Answer
User Avatar
Wiki User
2005-10-06 18:35:31
2005-10-06 18:35:31

The Fuel pump is located in the fuel tank. The tank must be removed and lowered to access the top of the tank. The fuel pump is located in the top area with the fuel sending unit. Not easy and must release the fuel pressure

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how do you change a timing belt on a 1998 Plymouth breeze 2.0 liter engine

User Avatar

How do you change a timing belt on a 1999 Plymouth Breeze belt was broken?

User Avatar

Get a manual on your car from AUTOBOOKSONLINE.COM

User Avatar

You don't. This is one job that should be left to a professional.

User Avatar

You have to remove the drive side tire and the wheel cover to get to the battery.

User Avatar

a lot of work. the transmission has to be removed.

User Avatar

About 5 for a filter change. 9 for dry fill.

User Avatar

You take off the left front wheel and housing. It isn't under the hood.

User Avatar

Remove the left front wheel and inside fender skirt. The rest becomes obvious.

User Avatar

The transmission would have to be removed, which is a really big job

User Avatar

Remove wheels Remove caliper mounting bolts Slide caliper off rotor rotor should slide off

User Avatar

Your water pump is damaged...have it replace its a big job you might want as well change your timing belt when you do it..

User Avatar

u ned to change and flush the colant system and replace the thermostat it gets gunked up i had to do it 2 times in a year........

User Avatar

yes, they are the same engine. however the neons changed the electrical connectors in 1997 so if your breeze is 97 or up then try to get a neon motor from 97 or up. if you cant, then you will have to change all the sensors.

User Avatar

undo bolts , take off old one put on new one replace bolts tourque to 106.

User Avatar

you have to take off the driver side tire and remove that black plastic covering that goes around the wheel well... you'll see it

User Avatar

How do i change out a water pump on a 1999 playmonth breeze/engine 2.4

User Avatar

How do I change th starter on a 1994 Plymouth sundance

User Avatar

To change the thermostat on a 1997 Plymouth Breeze 2.0, a bucket should be placed under the vehicle where the hose for the thermostat is. This will catch any leaking antifreeze. Remove the hose clamp from the top radiator hose where it connects to the engine. Note how the thermostat is positioned in the hose. Remove the old thermostat and replace with a new one. Tighten the hose clamp after reconnecting it to the motor. Check antifreeze level and refill if necessary.

User Avatar

Remove the fuel tank or remove the bed, your choice.

User Avatar

First remove the tranny and flywheel. Then remove the old seal and put the new one in. Then put everything else back on.

User Avatar

how do you change rear wheel bearing in 1994 Plymouth acclaim

User Avatar

what do I need to change the 1997 Plymouth voyager transmission oil


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.