The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
9006 for the low beam 9005 for the high beam
Low Beam Headlight Bulb Size: 9006High Beam Headlamp Light Bulb Size: 9005
change the light bulb that does not go on, on low beam, it possible that the wire inside the bulb for low beam is broken
9006 for low beam and 9005 for high beam
The headlight has two filaments. One for the high beam and one for the low beam. The most likely reason the high beam is out is because the high beam filament is broken. Replace the bulb and it should fix it.
Low beam is a 9006 bulb, high beam is a 9005.
replace the high beam bulb
hi,,does any one know how to change the 2004 sienna headlight low beam light bulb? the high beam can be open turn it counterclockwise,,but can't open on the low beam,
9005 high beam and 9006 low beam.
Burnt out or loosely connected bulb.
2005 Suzuki Reno high beam headlight lamp is a 01003/H1 bulb. See sources and related links below for more information.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
Depending on the model year, you probably have one low beam bulb and one high beam bulb in each headlight.... unlike 90-94 323s that had one 2-filament bulb in each headlight.
You need to change the light bulb, the high and low beam on some vehicles are contained in a single bulb. or you could have a bad connection on just that one light
To replace the high-beam headlight bulb on a Volkswagen Golf, first the back cover of the headlight compartment must be removed. This allows access to clips that hold the bulbs in place; from there, the bulbs can be changed.
9006 for low beam, 9005 for high beam, and H11 for fog lights.
To stay within the law, low beam is 55w and high beam is 65w. See sources and related links below to lookup headlight bulb part numbers.
the bulbs used are 2-in-1 high-low beam bulbs if your high beam isn't working try rewplacing the bulb if that doesn't do it check the wiring or your fuses
High beam-9005 Low beam-9006
9006 low-beam; 9005 high-beam. See sources and related links below.
High and Low Beam Headlight - 9007Fog Lights - H3Boslla offers high-performance Led headlight bulbs for these bulb sizes.
Yes, the 2003 Hyundai Accent takes a dual-beam headlight lamp for low beam and high beam. See sources and related links below for bulb information.
LOW BEAM: there is a rubber gasket that surrounds the headlight. Unplug the wire harness by pressing in the tab at the back of the plug and pulling on the plug. Remove the rubber gasket and the headlight is just behind it. You will then see a wire clip that is spring loaded that hooks on a clip that holds in the bulb. The low beam bulb is an H7. It is also importnat to realize the adapter connected to the low beam bulb. It may be stuck quite well, so be careful. The passenger side is crowded by the washer fluid resevoir. HIGH BEAM: the high beam can be removed by unplugging the wire harness by pressing the tab at the back of the plug and pulling on the plug. Turn the headlight socket to the unlock position and remove the bulb. The high beam bulb is a 9005 Please note: DO NOT TOUCH THE GLASS BULB WITH YOUR BARE HANDS. If you do touch it, clean it immediately. The oils from your skin can cause premature bulb failure.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.