i have a 2002 eclipse gs and i have replaced the drums on mine. I am thinking that the year difference and model difference wont change the drums. For my car there were two holes in the drums when you take the tires off and i just had to get some bolts that fit in those holes and screw them in. That pushed the drums off the hub and i could change them. Although be careful when you get them loose and when you pul them off because depending on how worn they are the pads might stick to the drum and you might bend something in the assembly.
i was wondering how to change rear brake drums for 1999 Chevy venture
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
How do you change rear brake drum on a 2004 Chevy Venture?
Yes you can do the conversion. It will be about 250 for used parts and new pads while doing the conversion yourself. Otherwise if you get a brake upgrade and pay someone to do it, you could be up to 1000 dollars or more.
If you are inexperienced, you should not be messing around with the brake drums.
New brake drums are broken in the first time you go for a drive usually.
itsa stupid ugly!
brake drums should pull off if not rusted on.
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
Whenever you want to but once your brakes start squeaking that means your brake pads are low or your discs/drums are wrapped and need to be skimmed or replacing
It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.