There is a big difference between a TIMING BELT OR CHAIN and a MULTIFUNCTION SERPENTINE ACCESSORY DRIVE BELT. The Timing Belt or Timing Chain is inside the engine and cannot be seen. Some cars have a rubber belt (many Japanese vehicles) that has a limited life, such as around 60,000 to 80,000 miles. It takes 2 -3 hours or more to change it because many parts have to be removed, sometimes the radiator. If it breaks, in some cars, one of the pistons will hit one of the valves and bend it, and this type of engine is called a "valve bender". Fixing a bend valve is very expensive. Many cars have a steel timing chain (many USA vehicles such as Chevy, Pontiac, and others). The steel chain is good for the life of the engine. They usually don't break, maybe 1 in 500,000 vehicles. God bless America and vehicles that are MADE IN USA.
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
diagram for serpentine belt on 1996 Pontiac Bonneville se
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
Absoultly not.
serpentine belt routing vibe 2007
Should be a placard under the hood somewhere with a diagram of the belt routing. If it is missing then look in your owners manual.
How do you change a serpentine belt on 2006 Envoy
i have a 98' Pontiac grand prix gtp. i got the 2 serpentine belts replaced for $200.
how do you change serpentine belt gm 3.4 2003 venture
How Do I change the serpentine belt on a 1989 Cadillac Eldorado ?
You firts pull out the battery, and then you slip out the starter cables, and right where the belts are you snap those and that's where the serpentine belt should be changed.
how do you change the serpentine belt on a 2005 kia sodna