If a signal light stays on, but does not flash on a 1989 Pontiac, there could be a light burned out in the turn signals on the exterior of the vehicle. It is also possible that the flasher unit has gone bad. The flasher unit is under the dash on the driver's side.
On some cars the bulbs screw in from the rear and you have to take the light assy off to get to it.
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
There's a turn signal or running light out on that side, either front or rear. Turn on signal, get out and look. If both turn signals are working, chances are its the running light.
On some, you can get to the back of the light assy and take the bulbs out. If not, the assy has to come off
u will need a odb1 scanner,
my brake light stay on but emergency brake is unhooked
'How do you change a fog light in a 1996 Pontiac Bonneville? ... How do you
underneith the front bumber twist counter clockwise replace bulb
CHECK GUAGE LIGHT COME ON
possable voltage drain check alternator
pull trunk liner away from light that needs replacing, rotate bulb socket counter clockwise r/r bulb.
The easiest way is to bring it to a chevy dealer, because the two were companion brands.
How to change mirror light/ signal on 2011 f250
Does it shake and stall when decellerating or at anytime? because mine seems to do that but its only when decellerating at a stop light or stop sign or whever and it dont always do it.. only after long drives. (1992 Pontiac Sunbird). It might be a bad EGR Valve.
To change the turn signal light in the 2003 Subaru Baja you need to have a tool box with the necessary tools. Open the screws to access the turn signal light and replace it.
The 1973 ventura had a hole in the bumper for the front signal light, the 1974 had a slit in the front bumper with the signal light at the edge
We could use a little more info here. The turn signal light? In front? In the rear? The turn signal switch?
Assuming this is a front signal light you are trying to replace, you need to remove the head light assembly first. This will give you room to access the signal light bulb.
check brake fluid level under hood probaly low
How do you change front signal bulb on 2000 acura RL
open hatchback, take screws out in jam area,,the you can tilt brakelight asembly and pull off,,then change bulb and put abck
change the light bulb,
There is a screw on the black plastic underneath the fender, you have to unscrew it and you will have access to the signal light.
how to change front left turn signal bulb on a 2004 chevy express