I have a 91 but it should be the same, there is a 3/8 square head bolt in the bottom of the trans that you just stick a ratchet in to drain it. then there is a 17? or maybe 19mm fill plug around the bottom of the axle.
look it up on TeamIntegra.com and they have really good topics on all kinds of Integra stuff
Internal diagram for a acura integra manual transmission
Yes
To change the transmission oil on a 1988 Acura Integra drain the older fluid by loosening the drain bolt. Wait until it is done drain and cap the hole. Insert new transmission fluid in the transmission reservoir.
A 1993 acura integra gsr transmission.. Wat kinda question is that?
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.
yes
8lts i think
how do you replace an alternator on a 1990 integra
it will fit but you need to convert it to a cable clutch because the 98's are hydraulic
No, 90-93 was cable operated, 94-up was hydraulic.
what model is ur integra? it could be a integra ls tranny or u have a integra gsr that comes with a gsr tranny
Should be located inside transmission pan.