answersLogoWhite

0


Best Answer

On a 3.5L engine first disconnect the negative battery cable. (2) Loosen the pulleys and remove V-belt & A/C belt..note: the pulley located on timing cover must be removed. It has three bolts which are of different sizes, make sure you don't mix these bolts up. (3) Remove Harmonic balancer with removal kit. (4) Remove timing belt cover. You will see that the water pump is pulled by the timing belt. BE VERY CAREFUL YOU DO NOT TAKE THE ENGINE OUT OF TIME. If you mistakenly rotate a sprocket, you must realign the timing marks to prevent rod damage. (5) Loosen tensioner and remove timing belt. (6) Remove water pump. Clean surface of block face and disgard old o-ring. (7) Install new pump & o-ring...note: it is a good idea to replace timing belt as they should be changed every 100 thousand miles. (8) Install new thermostat. (9) Reinstall everything the way you took it apart. (10) Refill coolant.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change the water pump on a 1994 Dodge Intrepid with 3.5L engine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change water pump on 3.5 liter intrepid?

How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.


Water in engine oil 1998 Dodge Intrepid?

sounds like bad head gasket(s)


Where is the water pump located on a Dodge Intrepid 2.7L?

It is inside the front of the engine, driven by the timing chain.


Where is the engine water pump location on a 3.5 L 2003 dodge intrepid?

It is inside the front of the engine, driven by the timing belt.


Where can I get a diagram of a 1996 Dodge Intrepid water system?

Where can I get a diagram of a 1996 Dodge Intrepid cooling system?


Where is the water pump on the 1997 Dodge Intrepid 3.5 liter?

inside the front of the engine, driven by the timing belt


Where can I find water pump repair information on a 1996 Dodge Intrepid?

Autozone.com his a free online repair manual for the Dodge Intrepid and many other make and models. Also if your engine is a 3.5L V6 the water pump is driven by the timing belt, which would require you to set the engine at TDC and take the belt off.


Is there a weep hole next to the thermostat housing on a 2001 Dodge Intrepid engine?

If you have a 2.7L, then yes. That is the water pump weep hole.


How many hours does it take to replace water pump in Dodge Intrepid?

2 hours to 7 hours, depends on the engine size.


Where is the thermostat in a 1996 Dodge Intrepid?

/ Follow the top radiator hose down to the water outlet on the engine; the thermostat is in there. Follow the top radiator hose down to the water outlet on the engine; the thermostat is in there.


Is water pump ran by timing chain on 97 Dodge intrepid?

On the 3.5 intrepid engine, the water pump is run by the timing "belt"- no timing chain on this motor. Not sure about the 3.3 motor. On the 3.3L the water pump is driven by the serpentine belt.


Where is the thermostat on a 1999 dodge intrepid?

the thermostat on the 99 intrepid with the 2.7L is on the bottom water hose.the hose runs from the radiator at the bottom to the engine... the thermostat is on the engine... it is right next to the anternator.thanksAnswerHi Most thermostats are usually found on the engine side of the upper radiator hose.B.H.