answersLogoWhite
Chevy Silverado
Chevy Blazer S-10
Ford Bronco XLT
US Constitution

How do you check a 94 Blazer S10 fuel injection system?

282930

Top Answer
User Avatar
Wiki User
Answered 2007-07-31 04:43:36

If you have a vortec their is only one injector. It is located inside the throttle body. Called a spider and available only through dealer. Part retail $300

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


It already has throttle body fuel injection.


To my knowlege the spider fuel injector system came out in the 96 models. 1995 still had the throttle body injection.


Fuel injection system, fuel trim to lean (bank 1)


If you cannot get gas to the fuel injection system, you may have a clog. You can have the system looked at and flushed out and take it from there.


Carburetor, mechanical fuel injection, throttle body electronic fuel injection, ported electronic fuel injection,


It is not port injection.I believe the fuel is injected into a throttle bottle.


On the 4.3 vortec: to check for a leaking system, Remove plastic vortec cover, Then remove the round black thingy on the top and look in with a flashlight. It SHOULD be dry. If it is wet, you got a leak. Could be fuel pressure regulator (passenger side) or fuel line (driver side).


Carburetors and Fuel Injection... also direct and indirect fuel injection.


Sequential fuel injection is a type of ported fuel injection, yes.


check your injection system (fuel filter,injectors).


if you have cpi injection 54=62lbs if youhavetbi injection 9-13 lbs.


probably no because Chevy changed the type of fuel injection and it probably operates at a different pressure.


what is the diagram for a 4.3 Chevy blazer 1998 and the firing order vehicle is fuel injected


It would bolt in but you would have fuel injection problems.


M.P.F.I. Multi Point Fuel Injection. This is a fuel injection system for gasoline engine.


Yes it does. It has TBI / Throttle body injection, Fuel system.


Fuel injection systems do not need to "bled." However, if Questioner is actually trying to ask, "Should I relieve pressure in a fuel injection system before performing fuel system maintenance?" then the anwer is yes.


It is not getting enough fuel for complete engine combustion. Check the fuel injection system.


Check for a clogged fuel filter. If not that, check for a bad injector jet on the fuel injection system? Also check for too rich fuel/air mixture.


Research the passlock anti-theft system (it disables the fuel injection system). It is common for this to malfunction. All GM products are equiped with the system.


Yes it is a TBI / Throttle Body Injection. Fuel injected.



usually related to fuel injection or smog control. check O2 sensor or catilitic converter first.dirty gas grunge also build up in the arms of the fuel injection system. if a injection cleaner doesn't work, they need to be physically cleaned.





Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.