Safety Bulletin
home.comcast.net/~em-engineering/T2T013.pdf
Web Link
http://autorepair.about.com/library/faqs/bl053c.htm
*Do a Google search foran Accord forum then search the posts for that. You'll come across one in which someone else asked that same question and most likely they would have received a step by step answer.
Go to the internet and look for Eric the car guy. LOOK AT THE VIDEOS.
he demonstrate how to do it.
You can clean the E GR valve by removing the valve and soaking it in a cleaning solvent. You can clean the ports with the same solvent. Wipe everything dry after cleaning.
Use a Vacuum.
If you use turtle wax it will clean it up pretty good if it from the outside of theheadlights
Yes, it is possible to clean one throughly and not have to replace it. Give it a try, as you have nothing to loose.
No, you do not have to use them. It is not mandatory. However you will find they do help keep the sides of your car clean.
Right ontop of the starer. you can remove and clean but you probably are going to have to remove intake manifold and clean all the carbon. check engine on my 2000 Honda accord v6 came on. codes read not enough air flow, change egr valve. removed and it really wasnt dirty. Honda tech adviced to clean intake manifold. problem fixed.
To check the transmission fluid on the 1995 Honda Accord, just let the vehicle idle for a few moments on level ground. Then remove the dipstick and wipe it clean. Insert the dipstick and remove it again. This will be the fluid level.
Go Down to your local part store and by the best fuel injector cleaner for your car.
clean throttle bodY?
just bleed your brakes through each wheel cylinder until the fluid runs clean
It's fuel injected and has no carburetor. Use a quality fuel injector cleaner such as Seafoam or Techron poured into the fuel tank every 6 months to keep the injectors clean.
Hey Mark==I think it probably is the idle control solonlid mounted on the throtle body. Take it off and clean it. GoodluckJOE