It is due to your daytime running light not working properly or a burnt headlight, check your bulbs. I had the same problem and that was the problem.
How do you disable the DRLs on a 2005 Mitsubishi Endeavor?
Remove the fuse.
Press a button.
To disable the running lights either unplug the relay to the fuse box. Also there is a fuse for this in the fuse box remove this and that will disable the lights.
Our daytime running lights just stopped working on our 2007 Toyota rav4 bulbs???
To disable the daytime running lights on a 2008 Sequoia, turn the head light switch to the center position. It should show two headlights, one with an 'X' and a line between the two.
Try a hammer.
slightly apply the E brake
Unplug daytime running light module. It is located on driver side just under the front of the truck.
Hit 'em with a big hammer
press your ebrake one or two clicks and leave it on
Cheapest returnable answer is to remove the bulbs
Find and disable the DRL module.
Remove the fuse on the interior fuse box
To stop running the DRL daytime running lights in the 2005 Toyota Echo the headlight relay needs to be modified. The DRL module on the relay needs to be cut and relay inserted into the harness.
There is plug on air line marked drl next to fuse box
If you just want them off when your parked, just put on the emergency brake.
There is a fuse that protects that circuit. Remove the fuse - the DRL's go out. .
Your question needs to be in a complete sentence in order to be answered correctly on this site.
mash the emergency brake one click and that should turn them off
The most effective method involves the use of a craftsman 22 oz. ballpeen hammer.
Your vehicle is equipped the Daytime Running Lights, (DRL). A daytime running lamp (DRL, also daylight running lamp or daytime running light) is a lighting device on the vehicle that are installed in pairs. They automatically are switched on when the vehicle is moving forward, and is intended to increase the conspicuity of the vehicle during daylight conditions.
2001 GMC Savanna Van Daylight running lights. Do I need to disable the daylight running lights so I can install HID lighting system, for it to work?