Buy Quick Diconect tools At a parts store.They come on a strip in various sizes.
buy a fuel Quick disconnect tool. They make cheap plastic ones, and slightly more expensive metal ones
You need to get a quick disconnect tool from any parts house to remove the fuel lines.
Try the fuel line that is inder the front side drivers seat It might have a quick disconnect
Usually, the line feeding the recepticle has a collar that simply slips back away from the recepticle (You may have to push the line forward and then pull back on the collar.) Then it should release.
You have to drop fuel tank and use quick disconnect tool to change lines
Easy use a quick disconnect tool or a small screwdriver
You need a special tool called a fuel line disconnect to release the tabs.
First remove gas cap, then disconnect exhaust from flange by fuel tank. Disconnect fuel pump electrical connection, disconnect fuel filler hose and evap line from top of tank. Disconnect quick connect fittings on top of tank. Lower tank. This procedure should be done with the tank less then 1/4 full.
You need to take it to a repair shop that has the equipment to properly repair it.
Fuel injected? check under vehicle follow the fuel line from tank Carb? In the inlet line of the carb.
There is a slight amount of pressure on the line after shutdown. To relieve the pressure remove the gas cap, and look for a Schroeder valve on the fuel rail. If there is none and you want to change the fuel filter, just be prepared for a slight spray of fuel when you disconnect the fuel line. A rag over the connection when you disconnect the line will prevent a spray of fuel.There is a slight amount of pressure on the line after shutdown. To relieve the pressure remove the gas cap, and look for a Schroeder valve on the fuel rail. If there is none and you want to change the fuel filter, just be prepared for a slight spray of fuel when you disconnect the fuel line. A rag over the connection when you disconnect the line will prevent a spray of fuel.
with scissors