If the light was on before you changed the oil and you now have the correct amount of oil, and correct viscosity, then it can be that your oil pump is defective. not putting out enough pressure. if you have an oil gauge, if that shows oil pressure is OK, then your light can be shorted out.
no
Engine light has it's own separate gauge, for oil pressure. The oil light will come in emergencies not the check engine light. If you put in correct amount of oil, run engine and check oil level. If it's OK, than light will go out by itself.
That has NOTHING at all to do with the oil change. Go to AutoZone and they have a tool to tell you what the problem is.
Engine light has it's own separate gauge, for oil pressure. The oil light will come in emergencies not the check engine light. If you put in correct amount of oil, run engine and check oil level. If it's OK, than light will go out by itself.
NO.
When you are getting kinda low on oil and it is almost to where you need an oil change when you brake it sloshes the oil and makes the light go off.
Change your oil...
Hopefully you mean the "change engine oil" light and not he oil pressure light. Turn the key to the on position (do not start it), within 5 seconds press the accelerator to the floor 3 times. The change engine oil light should flash several times then go out. Who ever changed the oil should have done that for you.
Because you need to reset the light after you change the oil. Changing the oil doesn´t turn off the light automatically , you need to reset it. there is a very small push button on the dash board that has a label "RESET OIL CHANGE", with the engine off, push and keep pushing while you turn the key to power up the accesories but don´t turn the engine on. the light will go off after a second or so. Because you need to reset the light after you change the oil. Changing the oil doesn´t turn off the light automatically , you need to reset it. there is a very small push button on the dash board that has a label "RESET OIL CHANGE", with the engine off, push and keep pushing while you turn the key to power up the accesories but don´t turn the engine on. the light will go off after a second or so.
Your question is too vague. If you are talking about the Change Engine Oil warning, you have to read your owners manual and use the radio volume button to reset the engine oil life after you change your oil. A check oil light could mean you are low on oil. Fill up to 'full' line on dipstick and the light should go out. If you are sure the oil is Full and the light doesn't go off, there must be a sensor that senses the oil level is low.
It is in the manuel, it is a different process for different years..
To reset the "CHANGE OIL" light, turn the ignition switch to the "RUN" position with the engine off. Fully depress and release the accelerator pedal three times in five seconds. The light will flash twice and go out.