jack the car up and there is a cable going to both back brakes, usually if you yank on the cable it should release them
To tighten the emergency brake cable on a 1990 Geo Prism, start by depressing the brake pedal. Next, locate the parking brake equalizer bar. Rotate both rear tires to feel the brake shoes slightly drag against the brake drum.
Yes the Geo Prism has ait bags.
in the fill resivor attached to the master cylinder assembaly
The break light switch is located on the backside of the break peddle arm.
Turn signal or emergency, they're both located under your drivers side kick-panel.
GM made a small car called the geo prism. GM Chevrolet or GEO
where is the fuel filter located on a 91 geo prism?
on my sons 95 prism i had to loosen the nut on the brake light switch and turn it in a couple turns then retighten the nut, works fine
Check the bulbs - they are double filamented with the smaller being for the brake lights Check for a blown fuse Check the operation and alignment of the stoplight switch
Same answer as: "How do you replace a starter on a 92 Geo Prism LSI or GSI?" at this same site.
try your public library buy a haynes manual 15.00 bucks
what year was geo prisms made