0
How do you get the front rotors off of a 1989 Tracer There are 4 bolts that need to be removed from the rear of the rotor but there is no access to them?
Use2bsticks
Are you trying to turn your rotors? I had mine taken off to have the rotors turned only to find out that they are not supposed to be removed.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Mercury tracer heater core?
The Mercury Tracer heater core can be found behind the passenger side kick plate. The heater core can be removed by disconnecting the water supply lines and removing the retaining bolts.
How do you replace 2002 Cadillac Deville rotors?
I have an 01 Deville, which I just replaced the front rotors. Not sure if you need to replace the front or the back rotors...for the front it's easy. After you've removed the tire(s), remove the caliper from the bracket. This is done by removing the 2 bolts on the back of the calipers. FYI, all the bolts back there are 15mm. They're on there tight, so use a breaker bar. Once you've removed the caliper, you need to remove the caliper bracket in order to remove the rotors. The brackets are held on with 2 more 15mm bolts on the back side of the brackets. These puppies are on there! The bolts are installed with loc-tite, so you'll need to whack each one before you start cranking on them. After you've removed the bolts, the brackets will come right off allowing for you to remove the rotors.
How do you removed the front rotors?
Remove slide pin bolts. Then remove caliper. Rotor should slide off the hub.
Does a 1995 Mercury Tracer have backward threads on bolts?
NO!
How do you replace front brake rotors for a 1997 Chrysler sebring is there a nut to be removed or do the rotors slide off?
when you remove the caliper on the disk brake by removing the bolts on the inside of the caliper the rotor just slides off, the only thing holding the rotor in place is the wheel.
How to turn or change rotors for 97 Toyota Camry?
remove rotors on 97 CamryHi, I want to get my front rotors resurfaces as there is a vibration when braking. I have changed brake pads on my car before soi am sure i i know how to remove the calipers and need some assistance and further what bolts and nuts do i need to removed to pull the rotor out.Thanks
On a 98 civic ex there's two bolts that go through the brake rotors do you have to remove them to take off the rotors?
There are not bolts going THROUGH the rotors. In order to remove the rotor you have to remove the caliber, that does have two slide pins holding it in place.
How do you take the front rotors off on a 2002 Dodge Ram 1500 2wd?
With tire removed you will need to unbolt the caliper which is held on by two bolts caliper bolts). Once the bolts are removed you should be able to dislodge the caliper by grasping the top and pulling back or by rocking from top and bottom. Secure the caliper with a hanger to the frame not the rubber lines, be careful the pads may come loose. You will now have to remove the the caliper bracket also attached by two bolts. Once the bracket is removed the rotors should slide right off the studs. If corrosion has built up lightly tap around rotor with rubber mallet or a piece of wood and hammer. GOOD LUCK!
How do you change the front rotors on your 2001 ZX3?
First, remove the wheel. Then disassemble the brake calipers - two hex or star bolts located on the back which will require you to first remove the caps. Once the bolts are removed, the whole assembly should be able to slide of the rotors. Make sure you support the calipers somehow, do not just let them dangle from the connecting lines (They're fragile and can be easily be torn or pulled) Once the calipers are out of the way, the rotors are able to slide out. Remember to replace your pads if you're replacing the rotors, and bleed the brakes! I had a harder time bleeding the brakes after I did this than I did replacing the rotors.
How do you remove the mirror cover on a 2006 f-250?
The mirror cover can be removed by removing the mirror cover retaining bolts. You can access the retaining bolts by removing the inside door panel.
How do you remove brake rotors on Buick Rendezvous?
Jack up the car and take off the tire. After the tire has been removed, decompress the brake caliper and remove the brake shoes. Remove the 2 bolts attaching the caliper and remove the caliper. There are 2 more bolts left, they hold the caliper mount on. Remove those 2 and the Rotors wil come right off
How do you removed the front rotors on a 2004 Mitsubishi outlander Thanks?
On the face of the rotor are 2 holes. You need to simultaneously screw in 2 hex bolts, size: M8x1.25mm. The bolts will push the rotor off the wheelbearings. From the Advance auto store guy & Jim's dad.
