It would require the complete disassembly of the transmission because the tail shaft is the last part to come out of the transmission housing.
c4
If you were to disassemble the entire transmission, the last part to come out would be the tail shaft.
If you are talking about the SPLND STEEL center shaft that the driveshaft slides over, Then you will have to take the transmission APART to remove the shaft.
27
the 2wd turbo 350 has a longer tail shaft NEW ANSWER: The center shaft in a 4x4 transmission is longer then a 2 wheel drive trans. The reason is that it has a transfur case on the end of it, and the center shaft must fit into the transfur case to make it work.
There were turbo 350's with both a short and long tail shaft that fit a chevy. Long shaft were common from 71-76.
No it will NOT interchange. The 350 and 400 turbo are actually VERY different transmissions.
9 inch tail shaft
no it will not fit at all
there are several different varieties of the turbo 350 trans. some were short shaft some were long shaft. your best bet is to actually measure it.
replace tail shaft seal. to do this, remove drive shaft first. It helps if the front of the car is pointed down a steep hill. This way you won't loose any trans fluid.
None, TH stands for turbo-hydromatic, hence th350 or 350 turbo.