I couldn't wait any longer, so I tackeled the job myself. First of all, it's not the same procedure as described for the 1999 Camaro...that didn't work. First you have to elevate the car so that you can safely get under the front of it. Right in front of the right front tire you will notice several 10mm bolts holding up the plastic under panning. Remove those bolts, then drop down the plastic under panning and this will expose the back of the right front turn signal. Just reach up and twist out the bulb receptical to remove it and replace the old bulb with a 3157NALL bulb. It only takes about 10 minutes once you get the front of the car safely elevated enough to get under it.
Press and turn
You will have to remove the lens either the front or rear. you did not say which.
reach up under front bumper and twist the bulb out.
Under the front panel of the car
reach up under the bumper. twist the bulb housing and pull out. replace bulb.
should be able to reach up under the bumper, and twist and pull out the bulb.
how do u change front signal lights for corvette 1999
How do you change front signal bulb on 2000 acura RL
well it depends on what one you are talking about to change the front ones you have to go under the car there are 2 covers one for each side take them off and twist the turn signal socket and pull it out put new bulb in it and reverse proccess if you are talking about the side marker u have to do them from under the hood you change them the same way but no covers on them
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
Raise the front of the car and look underneath the front facia (bumper). You'll see a plastic cover on the bottom of the car. Located at each side in front of the tires you'll find access doors. Remove the screws. Now you can reach up and behind your front turn signal lights to change the bulbs. You can also get to the mounting screws this way to remove the light housings
I replaced the front brakes on my 92 camaro, it still pulls hard right when u hit the brakes??