answersLogoWhite

0


Best Answer

Press the lock button a second time.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you get your Saturn horn to chirp when you lock the doors?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you turn on the door lock horn chirp?

The programmable horn chirp (at least on the 2002 Malibu) can be disabled by pressing and holding either of the door lock switches in the unlock position for 10 seconds, with the ignition on and all of the doors closed. When you hear the horn chirp, programming is complete. To reactivate, repeat the procedure.


How do you turn on the door lock horn chirp on 2001 dodge ram?

you double click the lock or check your horn


How do you silence the chirp on a keyless entry for a 99 Malibu?

AnswerThe only way I know would be to find the source of the chirp, and disconnect the device.The programmable horn chirp (at least on the 2002 Malibu) can be disabled by pressing and holding either of the door lock switches in the unlock position for 10 seconds, with the ignition on and all of the doors closed. When you hear the horn chirp, programming is complete. To reactivate, repeat the procedure.


How do you stop the horn from honking when you lock the doors with the remote?

You don't.


Why does the horn sound continuously when I lock the doors of my Montero with the remote?

If the Montero's horn sounds continuously when doors are locked with the remote, this is due a horn pad failure. To repair, replace the horn pad assembly.


Why does the horn chirp twice on 2002 Ford Explorer?

You can confirm that all your doors etc. are locked on your Explorer by pressing the door lock button on your remote twice in 3 seconds . If the horn chirps once , everything is locked correctly , if it chirps twice , a door , hatch glass , or the liftgate is not properly closed


2001 Chevy Malibu LS and every now and then when you lock the doors you will hear a beep as if the car has an alarm but you don't think you have an alarm?

its not an alarm. its called a programmable horn chirp. made to indicate locking has occurred and for safety when you approach you car in a dark area. you can deactivate it by holding the lock switch in the unlock position for 10 seconds with the ignition in the ON position and all the doors closed. to reactivate repeat procedure


How do you stop 2008 sebring horn chirp?

You can download the manual for you car at http://www.chrysler.com/en/owners/manuals/ To disable the horn chip, follow the instructions on page 24 of your manual: # Press the LOCK button on your key for 4-10 ten seconds and then, while still holding LOCK, press the PANIC button # Release both buttons at the same time. # The horn chirp should now be deactivated. Repeat these steps to reactivate it.


How can you keep the horn from honking whenever you use the remote to lock the doors on a 2009 Ford Flex?

You can't.


Why does the horn barely blow when you lock the doors on your 2001 expedition?

Ford's version of an alarm. It is jsut telling you it is armed


How do you operate the security system on a 1999 Chevy S10?

if you have a key fob hit the lock button and the doors should lock press it again, the horn should honk , alarm is on. to test it out roll your windows down first then go and lock the doors with the fob and hit lock to set the alarm on, (horn should honk) unlock the door by hand and open door, horn should honk quietly then go off full volume after 30 seconds


Disarm auto lock feature on f150?

This is what the manual says but I have not been successful Deactivating/activating the autolock feature Before following the procedure, make sure that the ignition is OFF and all vehicle doors are closed. You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition back to ON. The horn will chirp. 6. Press the unlock control, then press the lock control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. 7. Turn the ignition to OFF. The horn will chirp once to confirm the procedure is complete.