answersLogoWhite

0


Best Answer

Did you get the truck this way? Have the dash lights ever worked? There are too many different ways, for them not to work. Check your fuses first, bulbs second. Then I would go after the dimmer control switch. Check the wires going into and out from this switch for power. Don't forget about the other half of the power check! The ground(s). Usually it's something simple, if they worked, and then quit.

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you get your instrument panel lights to work on my '88 Toyota Pickup?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace instrument panel lights?

you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights


How do you replace panel lights on a Toyota sequoia?

How do I replace the dash panel lights on a 2001 toyota sequoia?


Why are all of the instrument panel lights on?

All the lights a flashing on the instrument panel on my Chrysler town and country minivan. Why?


What would cause the tail lights and the instrument panel light in a 1997 GM 2500 Sierra Pickup not to work?

A blown fuse. Or a connection problem within the instrument cluster


How do you replace interior lights on a 1999 Toyota Corolla?

Which lights? Instrument panel? Dash? Overhead? Ash Tray? Glove box? Also, which model of Corolla?


How do you replace the instrument panel bulbs on a 1991 Nissan Pickup?

I located the instrument panel illumination lights on my 1990 Nissan D21 Pick-up by removing the clear plastic panel that protects the gauges and pulling the instrument panel forward. To do this, screws must be removed from the dash panel located around the instrument panel. There are also screws securing the clock adjustment knob and the glass/instrument panel itself. The bulbs twist into the backside of the instrument panel. There are several of them. I located the instrument panel illumination lights on my 1990 Nissan D21 Pick-up by removing the clear plastic panel that protects the gauges and pulling the instrument panel forward. To do this, screws must be removed from the dash panel located around the instrument panel. There are also screws securing the clock adjustment knob and the glass/instrument panel itself. The bulbs twist into the backside of the instrument panel. There are several of them.


How do you change dash lights in 2001 intrepid?

remove plastic around instrument panel . remove screws from instrument panel then pull panel towards you to unplug it this will allow to get to dach lights


How do you replace the instrument panel lights on a 1999 Toyota corolla?

I doubt that all the lights went out at once so lets start with the light switch. Either the switch or something on the light switch panel turns or slides to control the brightness of you instrument lights. It can also shut them completely off. So try that first. Next xheck the fuse panel for the fuse marked inst panel. It is most certainly one of those two things. If not you can always have the light switch or the instrument panel tested. Good luck.


Why did your instrument panel lights go out on your Honda radio?

my lights didn't go out.


A wiring diagram for instrument panel lights for 1998 Ford Explorer?

instrument panel lights for 1998 ford explorer the fues is good and when dimmer swtich is good


How do you change the bulbs in the instrument panel on a 1998 wrangler?

How do you change the light bulbs in the instrument panel in 1998 Toyota corolla


Which fuse controls the instrument panel lights on a 2002 Nissan X-Terra?

The instrument panel lights are controlled by the same fuse as the tail lights which is a 15 amp fuse located in the panel in the engine compartment adjacent to the battery. The fuse is only labeled for the tail lights.