Call Your Local Parts House. It Only Has One.
Gas Tank
The gas tank has to come down as the pump is in the tank.
Get a manual on your car.
tug the hose Drop the fuel tank, disconnect lines, remove pump and unit, reverse procedure to install.
on my 1986 Grand Am LE it is behind the fuel tank hanging on a clip and should have one hose/tube coming from one end and another hose/tube coming from the other end.
To The Owner of the 1986 Pontiac 6000: I am the owner of two 1985 6000 STE's and my fuel filter is an inline filter on the right side of the car. It is about the size of a soda can. First, shut of power so when you remove the fuel filter, very little fuel will come spurting out. Next, after removing the old filter, plug in a new filter, then restore power. Most Sincerely, Kristopher Gerbracht www.kristopher.gerbracht@juno.com
If the fuel injectors on your 1986 Pontiac Fiero are not squirting gas, first check the fuel pump to ensure it’s functioning properly and delivering fuel to the injectors. Next, inspect the fuel pressure regulator and the fuel filter for blockages or failures. Additionally, verify that the electrical connections and grounds to the injectors are secure and that the engine control module (ECM) is sending the correct signals. If everything checks out, consider testing or replacing the injectors themselves.
To convert a carbureted 1986 Honda CRX to fuel injection, you will need to gather a fuel injection system, which includes components like an intake manifold, fuel injectors, an ECU, a fuel pump, and necessary wiring harnesses. Remove the carburetor and install the fuel injection manifold, ensuring proper sealing and fitment. Next, install the fuel pump and lines to supply fuel to the injectors, and wire the ECU to control the system. Finally, calibrate the ECU for optimal performance with the new fuel injection setup.
2008 Pontiac G5 fuel tank is 13 gallons
where is the fuel filter on 1996 Pontiac grand am and how to fix it.
Pontiac does not use an inertia fuel cut off switch.