If it's on a 97-01 Ford Expedition you need to unplug the factory harness from the shift motor and then unbolt the shift motor from the transmission.
I've also included a great how to video link that will show you how to accomplish all of this.
On the rear of the transfer case, near the output.
It just unbolts. I think it like 3 or 4 bolts.
You can adjust the shift cable, on your Ford expedition, by turning the adjustment nuts. There is an adjustment not on each end of the cable.
The shift solenoid, on your Ford expedition, is located on the top of the transmission. The shift solenoid can be accessed through the shifter counsel.
The electric shift motor is located on the rear of the transfer case. Attached by 4 bolts and a wiring harness.
How do you depressurize fuel system to install filter 1998 ford expedition?
The shift cable for a 1998 Ford Expedition allows the transmission to be shifted throughout the available gears. It is linked directly from the shift lever to the side of the transmission.
Underneath the the plastic cover on the front differential.
On the 5.4 the knock sensor is under the intake and the connector is in the back of the motor on the passenger side.
Well, they are the 5.4L and the 4.6L motor on the Ford Expeditions.
Where is the blower motor relay at.
where is the speed sensor on my 2000 ford expedition v8 5.4 motor